Create Inner House Design
1.Here you have some process to maintain a hassle-free design of inner Building part
so here you should finish the outer side of the building, means exterior part the wall, the roof and other essentials.
2.Then go to the property box: and then got to View and view as a 3D.
3.Go to the section box in Property Dialog box.check Box appear for Section Box.
just tick a box to open the section box in 3D Drawing.
4.Then go for the section plane in 3D space and follow the pic
5.Then you have dragged this upper direction point towards the ground and the section property has sectioned the building horizontally and vertically as you required for editing or placing any component in the inner part of the building.
As you can see the image, the placing of bed, table, lights, chairs and the other essentials in their proper positions.
you can put whatever you want.
Then if you need this Section box vertically the dragged this point towards left side or right side.
You can see the section view of 3D space.Here all the components are put in their own manners.
So in this way, we can use this section box to use the inner part of the building design.And if you want to edit with duplicate then you have to go to the Edit type and choose a duplicate option and create the similar profile model.and save this.
After completing the section box model for the inner portion you can tick off the section box from Property box.
Thanks for reading the blog, hope you are enjoying.
Copyright © 2017-18, Cad180. All Rights Reserved